Perth Concrete Specialists
Coloured Concrete Driveways
Colour through the whole slab, not a coat that wears off.
Coloured in Perth
Coloured concrete lets you match your driveway to your home's palette with a finish that runs right through the concrete, so it does not chip or peel like a painted surface.
Coloured concrete gives you design control that plain grey cannot. By adding oxide through the mix or applying colour during the finish, we can warm the concrete to a sandstone tone, cool it to a charcoal, or match it to your render and roof.
Because the colour is part of the concrete rather than a coating sitting on top, it wears far better than paint or a thin topping. There is no coat to flake off under tyres.
100-125mm
Slab thickness
20-25 MPa
Concrete strength
3-5 yrs
Between protective reseals
7 days
Before light vehicle traffic
What's Included
What comes as standard
Integral or surface-applied colour options
Colour matched to your render, brick and roof
Runs through the slab, so it will not peel
Can be combined with exposed or honed finishes
Two Ways to Colour a Driveway
There are two main methods, and the right one depends on the look you want and your budget. Both produce a result that is fundamentally different from paint or a surface stain, because the colour is integral to the concrete itself.
| Method | How It Works | Best For |
|---|---|---|
| Integral oxide | Colour is mixed through the entire batch of concrete | Even, consistent colour that runs full depth |
| Dry-shake / surface hardener | Colour hardener is worked into the fresh surface | Stronger, more saturated surface colour |
Integral Oxide Colouring
Oxide pigments are added directly to the concrete batch at the plant. This colours the concrete throughout its full depth, so even if the surface chips or wears, the colour remains. Integral oxide gives a softer, more natural tone compared with a dry-shake finish, which is part of its appeal for homes with natural stone, timber or earthy render colours.
Dry-Shake and Surface Hardener
Colour Combined With Texture
Coloured concrete is often most effective when it is combined with a decorative texture rather than left as a plain coloured surface. The combination gives you visual depth that plain colour alone lacks.
- Coloured exposed aggregate: the stone reads through the colour for a rich layered effect
- Coloured honed: a smooth, architectural surface with a deep, saturated tone
- Coloured broom finish: a budget-friendly option that still adds warmth over plain grey
- Coloured stamped or stencilled: pattern overlaid with colour for a paved look
Colour Options Available
The standard oxide and hardener ranges cover most of what Perth homeowners want. Common choices and how they read in practice:
| Colour Family | How It Reads | Suits |
|---|---|---|
| Buff and sandstone | Warm, natural, similar to limestone | Brick, render, Hamptons, coastal homes |
| Slate and charcoal | Cool, contemporary, high contrast | Dark render, monochrome, modern styles |
| Terra and terracotta | Earthy, warm, Mediterranean feel | Limestone block, earthy render, gardens |
| Grey-brown (mushroom) | Neutral, versatile, ages consistently | Most Perth home styles |
Frequently Asked Questions
Common questions about coloured in Perth.
Quality oxide colours are UV stable and fade very slowly, especially when kept sealed. A good seal re-applied every few years keeps the colour rich. Cheap surface stains fade faster, which is why we use proper oxides and hardeners.
We can get close to most colours using standard oxide ranges and colour hardeners. Concrete is a natural product, so slight variation is part of the character, but we can match a tone to your home's palette. We always show you samples before pouring.
Yes, the colour additive and finishing add to the cost. It sits between plain grey and premium decorative finishes depending on the method and the complexity. We are happy to quote a few options side by side.
An existing slab can sometimes be coloured with a stain or a coloured resurfacing overlay, though the result differs from colour cast through a fresh pour. We can assess your driveway and advise the best approach.
Warm buffs and sandstones are consistently popular with brick homes, while slate and grey-brown tones suit the modern rendered facades common in newer Perth suburbs. We can bring oxide range cards to your quote.
Integral oxide gives very consistent colouring across large pours because the colour is in the mix. Natural variation in light and curing can produce subtle differences, which most people consider part of the character of concrete. We discuss expectations clearly at the quote.
Yes. Banded borders in a different colour or finish are a popular design detail that gives the driveway a considered, finished look. We pour the border and the field as separate pours with a clean control joint between them.
Request Your Free Quote
Request a quote for coloured
Send us a few details and we will come out, measure up and give you a clear, itemised quote with no obligation.
Call us
(08) 6275 6554Open
Monday to Friday, 8am to 5pm
